The following tools are required for installing curtains: small-toothed hand saws, chisels, carpenter's hammers, long drills, tweezers or drills, universal clamps, vise, scissors, big eye pins, screwdrivers, etc. Anchor plugs are made of soft wood (eg pine). The length of the plug is 60 mm and it is a square section (22 x 22 mm) with a thin pointed end at one end. In order to secure the curtain frame, the first line must first be set to the position of the hole used for cork stoppers on the upper part of the window hole. The height of the curtain installation depends on the total height of the room. Triple Rotors Watch Winder, only can hold 3 watchws, suitable for both man and women. Our products are all made of wood and exquisite workmanship. Double automatic watch winder can rotates clockwise, counter-clockwise or alternate it will work with all kind of automatic watches. his automatic watch winder will keep your automatic timepieces wound and ready to wear when you need them. This product also can wind up three automatic watches, or more than three, and this watch winder with Japanese mabuchi rotor, it's very quiet. It would not disturb your sweet dream even you put it in your bedroom. This product has high quality, high sales volume and low price in our company. Watch Winder For Three Watches Spin R Watch Winder,Arcanent Watch Winder,Watch Winder Mechanism,Carbon Fiber Watch Winder GUANGZHOU T.WING-PAK MFG.CO.,LTD , https://www.watch-winder-factory.com
When the room height is 2.5-2.7 meters, it is better to set the curtain frame against the ceiling. In this way, the window hole will appear larger and the room will appear higher. If necessary, chisel out or use a drill to drill several large holes 30 mm in diameter and 60 mm deep. Use a carpenter hammer to fasten the cork tightly into the hole so that it is flush with the wall surface. Put a generous nail into the center of the cork or use a screwdriver to screw the wide cap screw into the center of the cork and then secure the curtain frame or plate.
When installing a straight-type curtain frame, a 100-150 mm long square or wide cap screw is used; when installing a straight plate, a 1000-120 mm long fixture should be used; when installing a round-type curtain frame When used, small square screws or wide cap screws should be used. The panel can be hung with fixed or movable curtains. When the curtain is a movable curtain, the special rod can be fixed on the panel, and the pole can be freely moved on the rod by means of a certain number of rings. To fix the straight curtain frame, use screws to screw 2 U-shaped nails on the back near the edges, and let the head of the large nail protruding from the wall enter the arc of the 2 U-shaped nails.
In the case of curtains, the following metal rings are used: For round bar metal curtain frames, large metal rings are used; for round bar plastic curtain frames, large metal rings can also be used; for wood curtain frames, wooden rings are spun.
For the free movement of the ring should be greater than the diameter of the rod, usually not less than 10-15 mm.